![Cisco usb console cable driver](https://kumkoniak.com/24.jpg)
Windows or macOS to a Cisco standard serial console port for configuration and management. The response time between connecting the cable and seeing the result in Device Manager is the USB Serial Port driver doesn't work. Download the latest FTDI drivers at /downloads. If you unplug the cable, the port will no longer be listed, plug it back in, and it will be listed. A USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB console port on the switch. No need to download driver for Windows 8/10 and Mac OS with Microsoft (HCL) - USB 2.0 to RJ45 console cable is widely applied with multiple devices such as LAN controllers device routers, switches, firewalls with the CONSOLE port, such as Cisco, Ubiquiti, Juniper, Fortigate, Mikrotik, TP-Link, Huawei, HP ProCurve devices and more. ago Get one of these, stick with the old DB9 cable. Both worked, once I had the driver installed and the correct cables in the correct ports.
![cisco usb console cable driver cisco usb console cable driver](https://media.cablesandkits.com/p/CABCONUSBRJ4510c.jpg)
I used it with a USB-A-to-USB-A cable that was included with the router.
![cisco usb console cable driver cisco usb console cable driver](http://media.cablesandkits.com/p/37109001d.jpg)
The way to tell the installation of the Cisco USB driver is good and the connection is good is as follows: Open the Windows Device Manager, navigate to the Ports (COM & LPT) section and open the section so you can view the indivicual Ports, plug the cable into the PC and the Cisco router and you'll see a new port appear, typically COM4 which is the default as setup by the Cisco USB Console driver. USB CON works with the driver from Cisco, shows up as a console port in Device Manager, etc.
![Cisco usb console cable driver](https://kumkoniak.com/24.jpg)